Spargo Golf | Wishon Golf 929HS Fairway Wood (Clubhead ONLY)

Wishon Golf 929HS Fairway Wood (Clubhead ONLY)

Wishon Golf 929HS Fairway Wood (Clubhead ONLY)

by Wishon Golf $95.00

This item is only available with a custom in-store fitting

Book an appointment using our online system and swing by for a fit to perfection.

Price is Component Club-Head ONLY

Shallow Face, High COR Face Design for Distance with Ease of Playability
New Soft Stainless Hosel Allows Custom Lie and Face Angle Fitting 

Features:

  • 304 Stainless Steel Hosel is separately welded to the body to enable ease in bending for a wide range of custom lie and face angle bending (+/-4*).
  • 31mm Shallow Face Height is ideal for golfers who play off firm, short grass fairways orfor golfers who need more confidence getting the ball well up to fly.
  • HS 350 High Strength Steel Thin Face allows for a high COR for increased ball speed and superb off center hit performance.
  • Reduced Face-to-Back Sole Width reduces the sole to ground contact for more consistent contact with the ball, even from the rough.
  • Available in RH in #2 (12°), #3 (14°), #4 (16.5°), #5 (18°), and #7 (21.5°).  The 929HS are in development in LH for 2012.

Tom Wishon talks about the 929HS Fairway Wood.

A 360º view of the 929HS Clubhead.


 

 

929HS Specifications
Head Loft Lie Face Angle Weight Bulge Roll Face Prog. RH/LH
#2 - 12 12 57.5 0 Square 203g 13" GRT 14mm RH
#3 - 14 14 58 0 Square 208 14 GRT 14 RH
#4 - 16.5 16.5 58.5 0 Square 213 14 GRT 15 RH
#5 - 18 18 59 0 Square 218 16 GRT 16 RH
#7 - 21 21 60 0 Square 228 16 GRT 17.5 RH

Head Face Ht. Face Width Front-Back Bore Diam. Hosel OD Face Thick
#2 - 12 31mm 84mm 77mm 0.335" 12.3mm 1.70mm
#3 - 14 31 84 76 0.335 12.3 1.65
#4 - 16.5 31 84 76 0.335 12.3 1.65
#5 - 18 31 84 75 0.335 12.3 1.65
#7 - 21 31 84 75 0.335 12.3 1.60

Face material:  HS 350 High Strength Steel (NiCr plated)
Body material:  17-4 Stainless Steel
Hosel material:  304 Stainless Steel
Face construction:  Forged High Strength Steel Face
Weight bore:  1) Hosel - 7.5mm diam. x 15mm deep
 2) Sole - 7.5mm diam. x 15mm deep
Ferrule required:  Yes, any TWGT Wood Standard with 12.3mm Bottom OD
Hand select options:  +/- 1 loft, lie, face angle
 +/- 2g headweight
Scorelines:  CNC Engraved, 0.8mm wide x 0.2mm deep
Bottom of bore to ground:  929HS = 1.5"
Leave a Comment

Join Spargo Nation!

Join our newsletter to stay current on golf technology, close out deals on clubs and tips from area professionals.

Spargo Golf

1000 New London Ave
Cranston, RI 02920
Ph: 401-946-4653