Accra Tour Z CB Platinum Wood Shaft

Accra

 

**NOTE- Customer's who wish to purchase this shaft must purchase an adaptor for install onto the shaft, or send us their club directly to install all ACCRA products.  Per ACCRA request, all products must be built by an Authorized Shaft Technologist, to which Spargo Golf has been recognized as Top 50 Worldwide. 

Tour Z CB Platinum (Counter Balance) - Combining all the technological attributes of the ST and LS models, the CB offers a higher balance point.  This promotes a lower ball flight without the need for a more stable tip section.  For golfers looking for spin and launch control while maintaining the ever present ACCRA feel, this shaft is the ultimate.  Perfect for golfers with a smoother swing tempo, yet strong enough for those with superior club head speeds.  Similar to the popular ACCRA XE80 series, but without the cumbersome AXIV material, which added weight.  The ACCRA CB Platinum shaft incorporates the thin wall technology, yet move the CG higher.  The unique feel of this shaft and the opportunity to increase club head and ball speed has already peaked the interest of several PGA Tour players.

The ACCRA Tour Z is designed to be extremely stable line of shafts with three distinctive launch characteristics.  The unique aspect of this line of shafts is that the tip section is extremely stable yet the torque is not too low, again offering stability without the harsh feel that other tip firm shafts exhibit.  

This year's new and ultra cool graphics incorporate a matte black finish and a rubberized clear coat for a rich texture.  The ST and LS models feature an iridescent band that actually changes color in the sunlight as the shaft is rotated.  The Platinum Series uses ion plating to emphasize the premium look that an ACCRA Tour Z Platinum owner should expect.

Tour Z Technology

Constant taper design:

The constant taper design enables ACCRA to achieve the ultimate combination of maximum energy transfer, strength and feel.  Any change of the rate of taper throughout the length of the shaft acts as a barrier to the flow of energy; constant taper shafts allow energy to flow uninterrupted.

Thin all thickness:

High modulus materials were incorporated in order to utilize the thinnest wall thickness in the industry, thus maximizing the opportunity for weight distribution and offering smooth playability.  Feedback is an important attribute to any golf club, and Tour Z shafts promote maximum feedback and stability on all shots.

Constant flex technology:

All shafts within a model share identical specifications.  Once a golfer is fit to a Tour Z CB Platinum shaft, a fitter may test several different weights, knowing the shaft will all flex identically.  Most other shafts get softer as shafts get lighter, but ACCRA Tour Z shafts offer the most stable, light weight shafts in the industry.  This enables golfers of all levels to benefit from lighter shafts designed to play like heavier shafts.

 

ACCRA's Tour Z Benefits

The Tour Z program is designed to be a comprehensive fitting system, enabling a club fitter to fit using traditional methods and/or the innovative DyMatch philosophy.

ACCRA Tour Z encompasses unique design features.  The constant taper design of each shaft creates maximum energy transfer and optimal stability.  With the use of super high modulus composite materials, this ensures smooth feel and torsional strength.  The tip section of the Tour Z shaft is reinforced with Kevlar wrap to increase strength, allowing for higher torque and increased feel.

Tour Z's also maintained a Single Frequency Technology (SFT), where flex is consistent throughout all weights.  Each series in the Tour Z family has the optimal fitting combinations.

Tip Mid Butt Tip Butt Tip
Title Type Flex Launch Weight Length Flex Flex Flex CPM Parallel OD Torque OD
 TZ CB 55   Driver  M3 Low-Mid 57 46 25.00 52.00 66.00 245 4 0.600 5.00 0.335
 TZ CB 55   Driver  M4 Low-Mid 59 46 29.00 55.00 70.00 255 4 0.600 4.50 0.335
 TZ CB 55   Driver  M5 Low-Mid 60 46 31.00 62.00 72.00 265 4 0.600 4.00 0.335
 TZ CB 65   Driver  M3 Low-Mid 68 46 27.00 50.00 66.00 245 4 0.600 3.00 0.335
 TZ CB 65   Driver  M4 Low-Mid 70 46 30.00 55.00 74.00 255 4 0.600 3.00 0.335
 TZ CB 65   Driver  M5 Low-Mid 72 46 33.00 60.00 80.00 265 4 0.600 3.00 0.335
 TZ CB 75   Driver  M3 Low-Mid 77 46 29.00 50.00 69.00 245 4 0.600 3.00 0.335
 TZ CB 75   Driver  M4 Low-Mid 79 46 30.00 55.00 74.00 255 4 0.600 3.00 0.335
 TZ CB 75   Driver  M5 Low-Mid 81 46 33.00 60.00 87.00 265 4 0.600 3.00 0.335
 TZ CB 85   Driver  M4 Low-Mid 89 46 29.00 52.00 78.00 255 4 0.600 3.00 0.335
 TZ CB 85   Driver  M5 Low-Mid 90 46 34.00 60.00 79.00 265 4 0.600 3.00 0.335


Related Items