Wishon Golf 949MC Fairway Wood (Clubhead ONLY)

Wishon Golf

Book an appointment using our online system and swing by for a fit to perfection.

Schedule a fitting

Price is Component Club-Head ONLY

The High COR 949MC Fairway Woods are Even Better with their Re-Design in 2011

Features:

  • New CNC Precision Engraved Scorelines replaces the former laser etched lines to channel moisture away from the face at impact from wet grass and rough for more penetrating ball flight.
  • 2nd Weight Bore on the Sole to allow clubmakers to use a wider range of lengths and shaft weights to achieve more swingweight (MOI) fitting options for golfers.
  • Forged, High Strength Steel Cup Face for high COR delivers the highest possible 1.49 smash factor  – never thought possible from a fairway wood.
  • Semi-Shallow 32mm Face Height combines with the high COR face design to offer a superb high performance design with the confidence to easily hit the ball high and far.
  • Tapered Crown Wall Thickness Design gradually increases the wall thickness at the rear of the head to create a more rear CG position for slightly higher launch angle.
  • Available in RH in lofts of 14 (#3), 16.5 (#4), 18 (#5) and 21.5 (#7).

Awards:

  • The 949MC fairway woods were awarded the Golf Digest Hot List award for best fairway woods for 2008.

 

949MC Fairway Specifications
Head Volume Loft Lie Face Angle Weight Bulge Roll
3-14 140cc 14 57 0 square 208g 13" GRT-O
4-16.5 140 16.5 57.5 0 square 213 13 GRT-O
5-18 140 18 58 0 square 218 14 GRT-O
7-21.5 135 21.5 58.5 0 square 228 14 GRT-O
 
949MC Fairway Dimensions
Head Face Ht. Face Width Front-Back Bore Diam. Hosel OD Face Thick. Face Prog.
3-14 32mm 90mm 79mm 0.335" 12.3mm 1.6mm 16mm
4-16.5 32 90 79 0.335 12.3 1.6 17.5
5-18 32 90 79 0.335 12.3 1.5 19
7-21.5 32 90 79 0.335 12.3 1.5 20.5

Face material:  Forged HS300 High Strength Steel Alloy
Body Material:  17-4 Stainless Steel
Face construction:  Forged, Cup-Face
Weight Bore:  Yes, 1) Hosel Weight Bore (capy. 9g) 2) 2nd Weight Bore on Sole (capy. 9g)
Ferrule required:  Yes, any TWGT Wood Standard ferrule with 12.3mm bottom ODHand
Hand Select Options:  +/- 1 loft, lie, face angle
  +/-2g headweight
Scorelines:

 CNC Engraved, 0.8mm x 0.2mm deep

Bottom of Bore to Ground:  949MC = 1.25"


Related Items